1.0 PURPOSE: To define the procedure for disposal and handling of waste & hazardous waste. 2.0 SCOPE: This procedure for disposal and handling of waste & hazardous waste is applicable at (Company name). 3.0 DEFINITION:

1.0 PURPOSE: To lay down the Procedure for Monitoring the Lux level. 2.0 SCOPE: This procedure for monitoring the Lux level is applicable at (Company name). 3.0 DEFINITIONS: Nil. 4.0 RESPONSIBILITY: 4.1 Engineering personnel shall

1.0 PURPOSE: To lay down a procedure for operation and Cleaning of HSD Storage tank. 2.0 SCOPE: This procedure applies for Operation and Cleaning of HSD Storage tank at (Company name). 3.0 DEFINITIONS: Nil. 4.0

1.0 PURPOSE: To lay down the procedure for operation and cleaning of brine chiller. 2.0 SCOPE: This procedure for operation and cleaning of brine chiller is applicable for brine chiller located at (Company name). 3.0

1.0 PURPOSE: To lay down the Procedure for Recovery test for clean room. 2.0 SCOPE: This procedure applies for Recovery test for clean room at (Company name). 3.0 DEFINITIONS: Nil. 4.0 RESPONSIBILITY: 4.1 Engineering personnel

1.0 PURPOSE: To lay down the Procedure for dumping challenge test for RO, EDI, Purified water and WFI System. 2.0 SCOPE: This procedure applies for dumping challenge test for RO, EDI, Purified Water and WFI

1.0 PURPOSE: To lay down the procedure for chemical sanitization of potable water storage and distribution system. 2.0 SCOPE: This procedure applies for chemical sanitization of potable water storage and distribution system at (Company name).

1.0 PURPOSE: To lay down the Procedure for Air flow Pattern visual test. 2.0 SCOPE: This procedure applies for Air flow Pattern visual test at (Company name). 3.0 DEFINITIONS: Nil. 4.0 RESPONSIBILITY: 4.1 Engineering personnel

1.0 PURPOSE: To lay down the Procedure for measurement of Air Velocity and air changes per hour. 2.0 SCOPE: This procedure applies for measurement of Air Velocity and air changes per hour at (Company name).

1.0 PURPOSE: To lay down the Procedure for Integrity test of HEPA Filters. 2.0 SCOPE: This procedure applies for Integrity test of HEPA Filters at (Company name). 3.0 DEFINITIONS: Nil. 4.0 RESPONSIBILITY: 4.1 Engineering personnel

1.0 PURPOSE: To lay down the Procedure for Differential pressure measurement across HEPA Filter. 2.0 SCOPE: This procedure for Differential pressure measurement across HEPA Filter is applicable at (Company mane). 3.0 DEFINITIONS: Nil. 4.0 RESPONSIBILITY:

1.0 PURPOSE: To lay down the Procedure for HVAC Duct cleaning and leak Test. 2.0 SCOPE: This procedure applies for HVAC Duct cleaning and leak Test at (Company name). 3.0 DEFINITIONS: Nil. 4.0 RESPONSIBILITY: 4.1

1.0 PURPOSE: To lay down the Procedure for electrical safety guidelines while working on equipment’s connected by electrical power supply to avoid electrical accident and ensure personal safety. 2.0 SCOPE: This procedure for electrical safety

1.0 PURPOSE: To define the procedure for integrity testing of vent filter by Bubble point test. 2.0 SCOPE: This procedure for integrity testing of vent filter is applicable at (Company name). 3.0 DEFINITION: Not Applicable.

1.0 PURPOSE: To define the procedure for cleaning of water tanks used in purified water generation system. 2.0 SCOPE: This procedure for cleaning of water tanks is applicable to water tanks which are being used

1.0 PURPOSE: To lay down the procedure for cleaning of RO membrane. 2.0 SCOPE: This procedure for cleaning of RO membrane is applicable to RO system at (Company name). 3.0 DEFINITION: Nil 4.0 RESPONSIBILITY: 4.1

1.0 PURPOSE: To lay down a procedure for passivation of purified water distribution system. 2.0 SCOPE: This procedure for passivation of purified water distribution system is applicable to Purified water distribution system at (Company name).

1.0 PURPOSE: To define the operating procedure of chilled water system. 2.0 SCOPE: The SOP for Operating Procedure of Chilled Water System is applicable to chilled water system at (Company name). 3.0 DEFINITION: Chiller Water

1.0 PURPOSE: To lay down the Procedure for Hydrostatic test for pipe lines. 2.0 SCOPE: This procedure applies for Hydrostatic test for all the MS, SS, PP and GI pipe lines (Company name). 3.0 DEFINITIONS:

1.0 PURPOSE: To lay down the Procedure for Calibration of Dosing Pumps. 2.0 SCOPE: Procedure for Calibration of Dosing Pumps is applicable to all the Dosing Pumps related to the water plant at (Company name).

1.0 PURPOSE: To lay down the procedure for operation and cleaning of portable de-humidifier. 2.0 SCOPE: This procedure for operation and cleaning of portable de-humidifier is applicable at (Company name). 3.0 DEFINITIONS: De-humidification: Removing of

1.0 PURPOSE: To lay down a procedure for identifying SS316 or SS 304 through molybdenum test kit. 2.0 SCOPE: This procedure applies to all the equipment’s or items for which the SS quality is to