1.0 PURPOSE:
To lay down the procedure for operation and cleaning of static passbox.
2.0 SCOPE:
This procedure is applicable for operation and cleaning of static passbox in Warehouse and Production department at (Company name).
3.0 DEFINITIONS:
4.0 RESPONSIBILITY:
4.1 Warehouse / Production operator is responsible for operation and cleaning.
4.2 Warehouse / Production officer / executive is responsible for execution of the procedure and to confirm.
4.3 Head-Warehouse / Production is responsible to ensure compliance of the procedure.
5.0 PROCEDURE:
5.1 Precaution:
5.1.1 If any incident occurred during operation immediately inform to superior and head of the department.
5.1.2 Ensure that both the doors should not open at the same time.
5.2 Operating procedure:
5.2.1 Switch ON the main power to the pass box.
5.2.2 Press the RED colour push button to open the pass box door from one side.
5.2.3 If the door of one side is opened then opposite side door will be in locked condition and there will be red colour lamp indication will glow.
5.2.4 Place the material in static pass box. Once the material is kept inside, close the door.
5.2.5 Another side person shall press the red colour push button to open the pass box door.
5.2.6 Take out the material from static pass box and close the door.
5.3 Cleaning procedure:
5.3.1 Clean the inside and outside surfaces of the pass box with lint free cloth dipped in scheduled disinfectant solution, hold it for validated contact time.
5.3.2 Clean the inner and outer surface of the pass box with lint free cloth dipped in purified water and followed by dry lint free cloth.
5.3.3 Clean the push buttons and indicator with dry lint free cloth.
5.3.4 Record the operation and cleaning activity in logbook.
6.0 ABBREVIATIONS:
SOP :Standard Operating Procedure
No. :Number